How to Clean A Rug

Knowing how to clean a rug is very important for increasing its life span and keeping it hygienically fresh. There are a lot of allergens, pathogens, contaminants, pollutants, dirt, and grime that can accumulate on your rug over time, so regularly cleaning it is crucial. Not only is this beneficial for the life span of your rug, but also for the health of people and animals who come into contact with the rug as well.

Rug cleaning at home can seem like a laborious task sometimes and there will be situations where you need to get a professional rug cleaning service. You should be very careful with the cleaning solutions and methods you use because different types of fibres respond differently to various cleaning methods. This means that while some rugs can handle steam cleaning, others will be destroyed by it.

This is why rug cleaning should only be done by professional rug cleaning companies such as Rug Cleaning Sydney. While you can do mild stain removal at home, there's always a risk that what you do and use can make it worse. But until then, rug cleaning DIY is something that you can manage yourself, and here’s how.

How to Clean A Rug at Home

So you’ve decided that your rug needs a freshen up. Great! Because they need regular maintenance that should not be neglected or overlooked. Hiring a rug shampooer or rug steam cleaner machine may seem like the right choice, but for rug cleaning at home, you need to take a different approach in case you need to call a professional later.

This rug dry cleaning method actually draws from our specialised 7-stage rug cleaning process, so you know it’s effective and does a good job. If your rug has stains on it, then scroll down the page to the section on stain treatment and then proceed to step one afterward.

1. Identify Fiber Type and Construction

You first need to know what your rug is made out of before you start putting moisture and chemicals on it. This is crucial because different types of fibres respond to different cleaning methods. Look on the backside of your rug for the manufacturers label. Hopefully it’s still there and was included when the rug was made.

This label should state what the rug is made of and sometimes what the backing is made of as well. If your rug is made of wool, silk, cotton, shag, nylon, polypropylene, olefin, acrylic, or polyester, then you’re good to go.

If it’s made of viscose, also known as rayon, banana silk, art silk, bamboo silk, nitro silk, acetate, modal, lyocell, or cuprammonium, then you should contact a professional rug cleaning service who knows how to clean a rug with this delicate and weak fibre construction.

How to Clean A Rug

2. Vacuum

The first step for cleaning your rug is to vacuum it. Make sure you have a good quality vacuum cleaner that can extract the dirt and grime that’s built up over time. A vacuum cleaner that has a beater bar will be effective for moving the fibres and exposing the particles that have been trapped in between them on high pile rugs.

3. Pre-Spray

Now you need to pre-spray your rug with a cleaning solution. The one that you use will depend on the type of rug you have. You also need to do a colour test to make sure that the rug won’t bleed after you clean it.

You can do this by putting a small amount of your cleaning solution in a corner of the rug and let it sit for a few minutes before cleaning it up with a white cloth. If the colour transfers to the cloth, then you should not proceed with cleaning the rug.

How to Clean A Rug at Home

4. Cleaning

After you have applied your cleaning solution, you now need to agitate it in so it can work. This can be done using a hand mitten or specialised cloth with an agitator built into it if you don’t have access to a rotary brush machine or rug washing facilities. This is a very important part of knowing how to clean a rug, because agitation makes the cleaning solutions work and do their job.

5. Drying

The rug now needs to have the moisture dried and removed. You can vacuum the rug again to remove some moisture from the surface of the rug. After this is done, the rug will need to be positioned in a place where airflow and temperature is ideal, especially if it was urine damaged.

This can be hanging over a balcony or rail, out in the sun briefly, or need an open door or window with cross-ventilation. If the rug is not properly dried, it will get water damage and you will have a whole nother set of problems to deal with.

Once the rug is completely dry it can be moved back to its place.

Rug Cleaning DIY

Got A Stain? Then Follow These Steps:

1. Scoop up the solids
2. Blot as much of the liquid as possible
3. Hold a cleaning treatment solution 20-30cm from the area
4. Spray the affected area
5. Clean it using a microfibre cloth with gentle agitation
6. Allow the area to dry and repeat steps 1-5 after 24hrs
7. Allow to dry and vacuum

The rug cleaning cost may be a factor before you hire a rug cleaning company, but remember that they are the experts and can get a much better result than you can achieve at home.

We how to clean a rug at home and in our specialised facility, and just having a professional rug cleaning service come around annually can make a big difference for your rug so please don’t hesitate and make a booking now through the button below and to ask about carpet protection to increase the lifespan of your rug.

Want Us to Clean Your Rug?

Rug Cleaning Sydney - Professional Rug Cleaning Near Me